Monday, November 29, 2010

61. ... Including The Kitchen Sink

I finally finally finally have a kitchen counter!!  It has been so long since I decided how to lay out this kitchen, I was a little worried how it was going to come out.  Yes, there were a million ways to do it, but I had to pick one, right?  I'm not crazy about that barn door of a fridge you walk into from the dining room but the plan is to turn it into a photo display area, we'll see how that goes.

Here is another view, showing the bar top that I built.  I actually made it from the counter top that was removed from my Apopka house when I had corian put in two years ago.  It was an old-style 50's laminate over some heavy duty 3/4" plywood that was too good to toss, so I peeled the laminate off and cut it in half for this project.  It will be tiled at the same time that I do the back splash.

Here's the faucet that I salvaged from the previous sink, installed with the water filter on the tap.  I'm very happy with the kitchen layout, there is a lot more space than I thought there would be.  I still plan to put a rolling island somewhere, for extra space when preparing big meals.

Here's the underside, showing all the supply lines hooked up.  I was amazed that when I turned on the water there wasn't a single drip - usually something needs to be tightened.  This week I have to install the drain and garbage disposal - which I may not be able to do without John's "Big Ass Wrench" but I'm gonna try.  My return to a civilized existence is slow, but progress is being made!

Also this week I worked on the last item before City Inspections:  the siding near the new garage door.  To do it properly I had to remove one row of the existing shingles (shhhhh!).  Underneath you can see the layers of wood where the two floors come together - it's not bad or rotten, just very irregular and lumpy.  My solution was to tuck some tar paper up under there and finish the job at hand - the rest will get done when I do the remainder of the siding on the house.

Here you can see a little of the black tar paper exposed at the top.  The siding I used was some I salvaged from the front porch demo that Steven and I did in August.  It's been scraped, but further stripping will be needed before I paint.  The trim on top of the door is also from the front porch, and once it is all painted, I think it will look great.



Roscoe's latest back yard excavation uncovered the bottom part of one of those wobbly hula girl dolls.  It provided a little entertainment, but obviously it had worn off by the time I took this picture.

This week I will call for inspections, then the agenda priorities shift to preparing for the arrival of my sister on Christmas day.  I want to have the drywall in the house taped and mudded, and I may even get to paint the guest room.  I'd rather get that done before I move furniture in there, so it's a reasonable goal I think!  Things are getting really exciting as a few of the decorative details begin to fall into place.  And there have been other thrilling developments...  The Grandview Project is far from over folks and I'll be sure to keep you posted as always!!

Saturday, November 20, 2010

60. Front Porch Window


Sometimes the easiest projects can have a huge impact.  This is the street view from inside the sunroom.  Up til now I had a bunch of salvaged wood stored in here, and I had never cleaned the windows.  But last week I found four awesome tab-top curtain panels for $4.94 and hung them on the $1 Ikea curtain rod I got from the Habitat for Humanity thrift store.  I mean come on - it don't get much better than that.  Add a couple of $5 chairs and a $10 light fixture... and you are singing my song.  Just a taste of how awesomely cool this house is going to be when I get through with it.

I stood back and admired that view for a minute, took a deep breath, and finally began the restoration of the front porch window.  The paint was all chipping, the trim had been removed back when the front wall was done.  The glass was broken.  I had a piece of replacement glass that I had ordered from Dave months ago, but this project kept getting put on the back burner... until now.  This is the window sill, which is representative of the rest of the window's exterior wood.  I used the heat gun, and over the course of two days managed to strip most of it off.  Fortunately the woodwork inside wasn't quite as bad - needed just a little sanding to be ready for primer.

Here's the full view of the window all taken apart.  The bottom part had to be taken out, and re-glazed, but since I did a lot of glazing photos with the kitchen window, I skipped that part.  See those spaces along side the window jamb?  Inside there are the sash weights, which got some new rope.  Unfortunately the pulleys that the rope is supposed to slide over are in rough shape.  One worked ok but the other kept pinching the rope.  It's about $45 per pulley to replace them, so that's just going to have to wait.

This is the inside, where the sash weight rope is knotted and fits into a neat little groove in the side of the window.  After installation was complete, the window went up and down fine, but not as nicely as it would if both pulleys were working.

Here is all the stuff I used to make a new screen for the window (except the screen material).  The white pieces are cut to size with a hack saw or metal jig saw blade.  They fit together using that corner piece.  The black coil you see is called spline, and it's shoved into that groove in the white metal piece using that pizza-cutter looking thing there.  I probably should have gotten a few more pics but it was late...

Here now is the window, all painted and put back together.  An extremely satisfying project, even though it was a marathon and took two whole days.  I love it.

This is the inside view, with some more $4 curtains.  The black things at the top are just unpainted areas left from when I removed those ugly wooden valances - that will all be covered up when I paint the rest of the room.

The really big news is the counter tops are going in this week, and soon thereafter I will have everything in my kitchen including the kitchen sink.  I will also be finishing up the siding by the garage door, which is the last item that needs to be completed before inspections!

Friday, November 12, 2010

59. Countdown to Inspections

Another project this past week took place in the guest bedroom.   Of course my constant companions weren't far - Rufus is usually just beyond the commotion, but Roscoe is always right in the middle of it.  I have to say I rarely feel lonely with these two around.

You may remember that when I had the AC put in, the ductwork had to get into the attic somehow, and the logical place was right alongside the chimney.  Since I'm not going with the "Jeffrey's Tube" (an obscure Star Trek reference for those of you who are scratching your heads right now) motif in this room I decided it needed to be walled up and made to disappear, just like the ducting in the living room.  Here you can see where I've begun the framing for the wall.  I built the wall on the floor and tilted it up into place - I find this the easiest way to do it when I'm working alone.  Mike Holmes would say to put the top plate in place and work down, but hey... I'm just one skinny girl, Mike!

Finished product is what counts, anyway, and upon inspection by those in the know, this passed with flying colors.  When it's all finished and painted, it will be flush with the bump out where the chimney is, and you won't even know it's there.  It's a great place for a dresser and I put some special cross-pieces for hanging something heavy like a mirror.

This picture was taken downstairs in the living room.  It's the AC controls, all taken apart.  When they originally installed it, the chase was not complete, and the wire for this needed to be re-routed now that everything is done.  When I got the thing apart I realized I needed a tiny jeweler's screwdriver for that row of eensy little screws you can see there.  I tried a knife and my fingernail before I came up with this - it's a tool that came with one of my deadbolts that you would use when re-keying.  Worked like a charm.  When I was done I realized I had flipped the wrong breaker and it was never off... lucky it was only low-voltage, and the AC guy said I was also lucky I didn't blow the _________ (I can't remember exactly what he said).


Another big project for the week was to finish the fence along the left side of the house, between me and the Architect.  I left the posts a little high in case I decide to put something decorative there on top.  It's a nice side porch, tiled with slate - might make a nice place for a table and chairs, maybe a couple of lounge chairs.  When you walk out the door on the inside staircase landing, this is what you see.

On the last day I was there, while I was having my coffee, I hung the two upper cabinets.  We didn't have time to do it when Dave was there, but he suggested I put a ledger board underneath to support it, so I could do it myself.  This particular part of the project went surprisingly smooth.  And now I have a place to put dishes!
Here  is Roscoe quietly watching the neighborhood goings-on while I'm hard at work in the kitchen.  Everyone loves looking up and seeing him!  After everything that got done this week I am ready for City inspections on three of my four permits:  Staircase, check!  AC, check!  Fencing, check!  All I have left to do before I call them is finish the siding by the garage door and trim out the window on the front porch.  I'll be starting that this week.  Oh, and I spoke to my neighbor when I got back to Apopka, Juan, who happens to be a contractor that specializes in building exteriors especially stucco. I asked him to give me a price on stucco-ing that block wall of mine in Daytona.  He said he would give me all the materials, and the tools to do it, and since he has a small project he is working on at home... Saturday I get a stucco class!  I am such a weirdo I am actually excited about this.